嗯啊射-嗯啊轻点视频在线观看-嗯啊你轻点好深啊hh在线播放-嗯啊秘书办公室呻吟浪荡-99re在线精品国产欧美-99re在线观看视频

Soybean milk mixerIt's made of stainless steel. The use of ion nitriding technology has improved the hardness of the blades. Adopting passivation treatment, the blades are sturdy and durable. In addition, the soybean milk machine does not rely on the sharp soybean milk machine agitator blade, but relies on the high-speed rotation of the motor and the angle of the blade to impact soybean milk, so it is generally not necessary to replace the soybean milk machine agitator blade. What's the reason why the soybean milk mixer doesn't rotate sometimes?

The juice collection tray is not installed properly. Juice collection tray is used to collect and guide juice. If not installed, it is impossible to collect juice and guide it to the correct position. Therefore, when the machine detects that the juice collecting tray is not installed, the soybean milk mixer will not work. If the upper cover is not installed properly, the machine may not work. If the voltage is too low, check if the voltage is too low at home. There may also be excessive pressure on the push rod. In this case, release the lever and gently press. You can also stop for 20 to 30 minutes and then use it again. If it can be used, it is the temperature control protection of the motor.

If there is no problem in the above tests, but the soybean milk mixer does not operate, it can be considered that the power supply is dead, the motor winding is open circuit, the carbon brush is seriously worn, the governor is poorly contacted or damaged, and the motor bearing is damaged. At this point, it is necessary to first check the fuse and power cord to restore normal power supply, and then check whether the internal wiring and connections are broken. Then rotate the motor shaft by hand, check the lubrication and wear of the bearings, add lubricant appropriately or replace worn bearings.